---
title: Image Filters
categories: tutorial
---

**Briefing** [Filters]()

**Reading** Szeliski Chapter 3.2

The exercises today are about exploration.
If the exercises seem trivial, you should feel free to look beyond.
However, make sure that you get used to the processes of finding
and using test images from different sources, making filters (as matrices)
manually, and applying them in python.
These are skills you will need for the next session.


# Exercise 1. A simple blurring filter.

In addition to OpenCV, we need numpy for arrays and the signal
processing library from SciPy.
```python
import cv2 as cv
import numpy as np
import scipy.signal as sig
```

We need a test image which we convert to greyscale.
Here we use [lenna.ppm](http://www.hlevkin.com/hlevkin/TestImages/lenna.ppm),
which you have to download and place in your working directory.
```python
frame =cv.imread( "lenna.ppm" )
grey = cv.cvtColor(frame, cv.COLOR_BGR2GRAY)
```
Other test images can be found at the 
[same source](http://www.hlevkin.com/hlevkin/06testimages.htm).

We display the image to check that everything works:
```python
cv.imshow("img",grey)
cv.waitKey(0)
```

## Averaging pixels

1. Consider the following python code.  What does it do?

```python
(n,m) = grey.shape
new = np.zeros((n-6,m-6),dtype=np.uint8)

for i in range(n-6):
   for j in range(m-6):
      orig = grey[i:i+7,j:j+7]
      new[i,j] = round(sum(orig.flatten())/49)
```

2.  Run the python code.  What does the matrix `new` look like?
3.  Display `new` as an image and compare it to the original `grey`.
    What is the visual effect?

What you should observe is a blurring effect.  
Contours are smoothened by averaging a neighbourhood.

# Exercise 2. Using a signal processing library

What we did above is such a standard operation that we have an API
therefore.
We can define a $7\times7$ averaging filter like this.
```python
f7 = np.ones((7,7)) /  49
```

+ What does this look like as a matrix?

To apply the filter to the image, we can use the standard
convolution operator as follows:
```python
g7 = sig.convolve2d(grey,f7).astype(np.uint8)
```
Note that we have to convert the result to integers explicitly,
lest OpenCV will not interpret it as an image.
The result can be displayed as
```python
cv.imshow("filtered",g7)
cv.waitKey(0)
```
+ Compare the two images.  What does the filter do?
+ Compare the filtered image to the image `new` from
  your manual averaging.  Do they look different in any way?

The API has different methods to handle the boundaries.  
We simply cropped a few pixel around the border, and thus `new`
may be smaller than images filtered with the API.

We can do the same thing using the OpenCV library, like this.
```python
c7 = cv.filter2D(grey,-1,f7)
```
The second argument (-1) specifies the colour depth of the output
which should be the same as for the input.

## Other tests 

1.  Download [Python/Blurring/lenna-awgn.png]() and
    [Python/Blurring/lenna-snp.png]().  These are noisy versions.
    What do the images look like?
2.  Test the above filter on the noisy images.  What do you get?
2.  Try different averaging filters instead of `f7`.  Try for instance
    $3\times3$ and $5\times5$ filters.  (Remember to change the 
    normalisation factor (49) so that you get a zero-sum matrix.)
    Do you get good denoising results?

## Disc filter

Sometimes a disc-like filter is used, like this.

```python
circle = np.array([[0,0,1,1,1,0,0],
   [0,1,1,1,1,1,0],
   [1,1,1,1,1,1,1],
   [1,1,1,1,1,1,1],
   [1,1,1,1,1,1,1],
   [0,1,1,1,1,1,0],
   [0,0,1,1,1,0,0]])/37
```

Test it.  Which filters give the best denoising effects?

# Exercise 3. A Gaussian filter

The Gaussian filter is a little trickier to implement, since we
want to be able to vary its parameters.
We use the Gaussian function
$$g(x,y) = \frac{1}{2\pi\sigma^2}\exp\frac{-(x^2+y^2)}{2\sigma^2},$$
where $\sigma$ is the standard deviation and $(x,y)$ is the pixel co-ordinates
with $(0,0)$ in the centre of the filter.

Firstly, the Gaussian function in `python` becomes
```python
def gauss(x,y,sigma=1):
    c1 = 1/(2*np.pi*sigma**2)
    c2 = 2*sigma**2
    return c1*np.exp(-(x**2+y**2)/c2)
```

1.  Check that the above code matches the mathematical formula.

We can make a list of lists of Gaussian coefficients in a simple
one-liner:
```python
B = [ [ gauss(x,y) for x in range(-t,t+1) ] for y in range(-t,t+1) ]
```
where `t` is an integer and the resulting filter is $(2t+1)\times(2t+1)$.

2.  How does the above code work?

To turn `B` into a matrix, we do
```python
A = np.array(B)
```

3.  Make the matrix `A`.  What does the matrix look like?

4.  The elements of the filter should add to one, to maintain the 
    luminence of the image.
    You can check this by calculating
    `A.sum()`.
    What do you think, is this sufficiently close to one?
    Why is it less than one?

5.  We can normalise the filter by calculating
    `AA = A/A.sum()`.
    Why does this give unit sum?

6.  Now, test the Gaussian filter on your test images.
    Use a couple of different sizes, e.g. $t=3,7,11$,
    and a couple of different standard deviations,
    e.g. $\sigma=0.5,1,2$.
    What do you observe?

# Exercise 4. Noisy images


You can try to make your own noisy images using the code below.

1.  How does each code snippet work?
2.  Apply the functions to different images to make noise versions.
3.  Test your blur filters on different images.
    Is there a blur filter which always works best?


## Gaussian Noise

```python
(m,n) = grey.shape
noise = np.random.randn(m,n)*sigma
noisy = (grey + noise).astype(np.uint8)
```

```python
def gnoise(img,sigma=1):
     (m,n) = grey.shape
     noise = np.random.randn(m,n)*sigma
     return (grey + noise).astype(np.uint8)
```

## Salt noise

```python
def snoise(img,p=0.1):
     (m,n) = grey.shape
     noise = (np.random.rand(m,n) > (1-p)).astype(np.uint8)*255
     return np.maximum(grey,noise)
```

## Pepper noise

```python
def pnoise(img,p=0.1):
     (m,n) = grey.shape
     noise = (np.random.rand(m,n) > p).astype(np.uint8)*255
     return np.minimum(grey,noise)
```

# Exercise 5. Further exploration (optional)


1. Take an image with your built-in camera and test your denoising filters
   thereon.
2. Look up openCV and other python libraries.
What built-in blur filters can you find?   
Are there any ready-made APIs to simplify the above exercises?
3. You may want to inspect my [Sample Code](Python/Blurring/).
It does approximately what we have done above, but the code
is cleaned up for use on the command line.

# Reflection

1.  Review today's tutorial.  What are the key concepts that you want to
    take with you?
2.  Next week we will introduce a new set of filters for differentiation 
    of the image.  
    Each filter is defined by a relatively small matrix.
    What do you need to change in the above examples to use different filters?
3.  What does the filter size matter?
    For instance, 
    how does the blurred image change when you decrease the size of the
    averaging filter from $7\times$ to $3\times3$?